Summer decoration all in all for the wood needs to be moisture-proof
Summer decoration “all in all” for the wood needs to be moisture-proof
As the weather progresses, the climate becomes hot and humid, and the wood contains large moisture. When the water is evaporated after the dry season, it will dry up. Therefore, the wood must be moisture-proof before the summer decoration.
It can be used to apply moisture-proof paint on the surface of wood products. If it needs anti-corrosion treatment, it should be painted with primer.
When buying wooden keels, be sure to choose a better dryness.
Since the wooden keel is generally used for frame ceilings and hidden inside the shape, if the wood keel has high water content and no ventilation, it will be deformed, moldy, and even rotted in the future.
銆€銆€Before laying the floor tiles and wall tiles, the bottom layer of the veneer should not be too dry. Generally, the water should be poured before the treatment, so that it can be absorbed for about half an hour, and then the cement mortar is used to ensure the firmness of the bond.
Since the material is drier than usual, for materials such as floor tiles and ceramic tiles that require water treatment, it is necessary to extend the water treatment time to be sufficiently close to saturation.
In this way, it is possible to avoid the phenomenon of emptying and falling off when cementing.
銆€銆€The summer is wet, and the latex paint will be slow to dry, moldy and smelly.
Therefore, we must first do the drying treatment of the base layer putty, the wall must be used more than three times of putty before the paint can be painted.
After each time you put on the putty, you should have sufficient drying time, do a good job of ventilation, and minimize indoor moisture.
If the putty is not dried out, repeat the putty or brush paint, it will lock too much moisture, and in the long run, the wall will appear “sweating” phenomenon, and even lead to large-scale cracking.
銆€銆€During the summer decoration, pay attention to the influence of high temperature on the details.
For example, when laying stone on the window sill, the construction team is required to apply more glue to the intersection of the stone and the window frame to avoid the sealing and the water leakage after the cold shrinking.
When using the plastic steel doors and windows when the developer delivers the house, pay special attention to the thermal expansion and contraction of the plastic steel.
銆€銆€At the same time, summer is a peak period of indoor air pollution. When the temperature rises and the humidity increases, it will lead to an increase in the release of harmful gases.
Indoor air pollution testing in the summer, its indicators will be about 20% higher than other seasons.
Therefore, after the summer decoration, the air conditioner should not be opened. The indoor air circulation should be kept, so that harmful substances can be distributed in time.
At the same time, choose the appropriate plants to absorb harmful substances, so that the joy of housewarming will come soon.